Technical note: A preliminary assessment of UV-C imaging using the Full Spectrum Imaging System (FSIS-II) for the detection of latent fingermarks.

The Full Spectrum Imaging System (FSIS-II) was assessed for the detection of latent fingermarks on a variety of substrates, specifically focusing on UV-C imaging for untreated marks and those that have been treated with cyanoacrylate (CA). The use of UV-C was effective at the detection of latent fingermarks on a variety of substrates and UV-C imaging may be effective when UV-A does not provide any fingermark detections on thermal paper. A Phase 2 and a small Phase 3 trials on aluminium cans were carried out with a detection sequence of UV-C imaging, CA fuming, UV-C imaging, UV-A imaging and BY40. For Phase 2 laboratory trials, the use of initial UV-C reflection was effective at removing the background and was a useful tool for initial screening. The use of UV-C was superior to UV-A after CA fuming and provided the highest overall number of high-quality marks. For phase 3 trials, the results showed that BY40 fluorescence was marginally more effective than UV-C imaging of CA-treated marks. This preliminary study shows that the FSIS-II and UV-C imaging can complement other methods for the detection of latent fingermarks.

Preparation of a low-cost fingerprint powder that harnesses white light to emit long-lived phosphorescence.

An inexpensive, commercially available doped strontium aluminate phosphor with long-lived afterglow has been prepared and assessed in the role of a luminescent fingerprint dusting powder. Blue, green, and aqua phosphorescence persisting for ca. 30 s was obtainable from treated fingermarks after charging the powders with the white light (400-700 nm) setting of a forensic light source. Imaging the phosphorescent afterglow enabled the elimination of background emissions encountered during latent fingermark examination. This was demonstrated by visualising fingermarks on substrates that possess inbuilt fluorescent security features and highly patterned substrate backgrounds, without any need for bespoke scientific equipment.

Fingermark quality assessment, a transversal study of subjective quality scales.

Fingermark detection research aims to improve the quantity and quality of fingermarks detected through the development of novel techniques. Subsequently, there is a need to evaluate these methods to determine the quality of the developed mark. Since the 1980's there has been a significant number of publications, which utilise a variety of different quality assessment methods. The introduction of common practice methods from the International Fingerprint Research Group (IFRG) aimed to implement a more standardised approach. Although these schemes are recommended as common practice, they are only guidelines. Consequentially, there is currently no universally accepted method to evaluate the enhancement techniques implemented in research. Therefore, this study aimed to collate and analyse the published protocols being used within fingermark detection research in order to better understand their application and how research is currently analysing and interpreting fingermark quality. This study comprised of manual and automatic searches of over 2000 published papers within the fingermark detection area. After thorough analysis of the articles, 396 published papers were found to have used a scale within the years spanning 1998-2022. The number of publications that report the use of a scale to assess quality for fingermark detection research has considerably increased over the last decade. However, whilst the number of publications utilising scales has increased, it is not proportional to the number of papers using the IFRG scales. The choice of scale is often institution specific and even more specific to their location. There are also numerous different adaptations of the IFRG recommended scales, as well as novel scales, which do not associate with the IFRG recommended versions being introduced the more research continues to grow. One such reason for this is investigated here, as different quality parameters are utilised within each individual scale. There is underrepresentation of these quality parameters within some of the IFRG scales, in particular the Centre for Applied Science and Technology (CAST) scale. This correlates to the considerable number of tailored approaches as authors are forced to add these parameters within the descriptions. Until there is an introduction of clear guidelines surrounding all areas of fingermark quality, from definition to parameters chosen within phases, the research area will continue to face such issues. This article recommends areas of potential study, whilst also recommending procedures that may be employed to alleviate some of the issues seen with fingermark quality evaluation.

Assessment of the Relation Between Craniofacial Tissue Profile-Morphology and Dermatoglyphics.

This study aims to evaluate the relationship between the convexity angle of facial tissue and fingerprint types by analyzing the connection between dermatoglyphic prints and facial structure. A total of 65 adults (24 females, 41 males) participated in the study. Each participant's fingerprint was analyzed using conventional methods of observation upon the index finger of the dominant hand. Fingerprints were classified into 3 fundamental types: arch, whorl, or loop. Craniofacial profiling was performed with measurements of hard tissue (Gl'-A-Pg') and soft tissue facial convexity (Gl-Sn-Pg) and total facial convexity (Gl-Prn-Pg) angles between 3 anthropological points determined on the lateral direct radiographs of the participants. Soft tissue convexity facial angle (Gl-Sn-Pg) values were found to be an average of 166.83° in females and an average of 162.05° in males. (Gl-Prn-Pg) values were found to be an average of 138.54° in females and 135.27° in males. The soft tissue profile of males showed a significantly convex structure compared with females. Also, the "whorl" type of fingerprint was found to be dominant in both sexes. There is no statistically significant difference in terms of soft tissue profile convexity in individuals belonging to the 3 different fingerprint groups. No statistically significant difference in soft tissue profile angular values between right-hand thumb and index fingerprint type groups were found among and between sexes. However, a comprehensive analysis of the relationships between the nose, lips, mouth, ear, and eyes and fingerprints of the same person may prove to be beneficial.

Preliminary forensic assessment of the visualised fingerprints on nonporous substrates immersed in water using the green and optimised novel nanobio-based reagent.

The discovery of forensic evidence (e.g. weapons) during forensic underwater investigations has seen an increasing trend. To date, small particle reagent (SPR) has been one of the routinely used methods for visualising fingerprints on wet, non-porous substrates. However, the long term use of SPR is detrimental to humans and environment due to the use of toxic chemicals. Although previously we have successfully developed and optimised a greener nanobio-based reagent (NBR), its suitable practical use in a more realistic scene (e.g. outdoor pond) was not evaluated. Therefore, this present research is aimed at (1) investigating the performance of NBR against the benchmark SPR in visualising fingerprints immersed in a natural outdoor pond and (2) evaluating the greenness of NBR against the analytical Eco-Scale. Results showed that the performance of the optimised NBR was mostly comparable (University of Canberra (UC) comparative scale: 0) with SPR at visualising fingerprints on three different non-porous substrates immersed in a natural outdoor pond. Observably, the NBR had higher preference towards aged fingerprints (up to 4 weeks of immersion). In addition, its greenness assessment revealed 76 points, indicating 'excellent green analysis'. The findings gathered here further supported the practical use of the NBR in forensic investigations.

Chemical composition of the fingermark residue: Assessment of the intravariability over one year using MALDI-MSI.

These past years, the chemical composition of fingermarks have attracted interest of researchers to meet multiple objectives like the determination of an individual's age, gender or lifestyle or the impact of some fingermark detection processes, to cite a few. These studies have highlighted the need to investigate the consistency of the fingermark composition over time. This research explores the evolution of the secretion residue composition of thirteen donors over one year, focusing on the intravariability. The dual use of Matrix-Assisted Laser Desorption/Ionisation Mass Spectrometry Imaging (MALDI-MSI) and chemometrics provided valuable data regarding the evolution of composition over time as well as the consistency of presence of hundreds of compounds.

A low-cost chemical and optical approach to develop latent fingermarks on silver mirror surfaces.

The development of fingermarks on reflective surfaces is often a challenge regarding the photography of images with overlapping lines, low contrast and reflections, especially considering that many forensic laboratories are supplied only with basic instrumentation for fingerprint analysis. The present study overviews these difficulties and proposes a combination of chemical and optical procedures, using low-cost products and equipment, to develop fingermarks on silver mirror surfaces. The chemical treatment promotes the delimitation of the substrate, transforming the reflective surface into a transparent surface. The results were statistically analyzed, indicating quality improvement of natural fingermarks pictures taken with standard digital camera on transparent surface. There was good observation of details and minutiae, even for samples recovered several days or weeks after deposition. The suggested method substantially modifies the composition of the substrate without any contact with the fingermark, preserving its characteristics and properties. Like other nondestructive methodologies, this approach could be prioritized over methods that directly change the evidence itself and allows for the photography of the fingermark in unaltered condition. Lastly, it does not impact on the efficiency of subsequent exams.

Dermatoglyphics in periodontics: An assessment of the relationship between fingerprints and periodontal status - A cross-sectional observation study.

CONTEXT: Widespread interest in epidermal ridges developed only in the last several decades; however, it is still at infancy in the world of dentistry. The word "dermatoglyphics" comes from two Greek words (derma: Skin and glyphe: Carve) and refers to the epidermal skin ridge formations which appear on the fingers, palms of the hands, and soles of the feet. AIMS: This study aims to assess the relationship between finger prints and chronic periodontitis. MATERIALS AND METHODS: Two hundred patients were equally divided into chronic periodontitis and periodontally healthy group. The fingerprint patterns of the participants were recorded with a rolling impression technique using duplicating ink on executive bond paper. STATISTICAL ANALYSIS USED: The descriptive analysis of the data was presented as percentage frequency. The percentage frequencies of each pattern on each individual finger were calculated, and statistical tests were applied. Unpaired t-test was used for intergroup comparisons (P < 0.05). RESULTS: There were statistically more whorls and less arches in both right and left hands in patients with chronic periodontitis. CONCLUSIONS: Dermatoglyphics can lead to early diagnosis, treatment, and better prevention of many genetic disorders of the oral cavity and other diseases whose etiology may be influenced directly or indirectly by genetic inheritance.

Dermatoglyphics and Cheiloscopy as Key Tools in Resolving the Genetic Correlation of Inheritance Patterns in Cleft Lip and Palate Patients: An Assessment of 160 Patients.

OBJECTIVE: The objective of this study was to correlate dermatoglyphics and cheiloscopy with genetic inheritance in cleft lip and cleft palate patients. DESIGN AND SETTING: This was a case-control study to look for asymmetry in finger and lip print patterns. All of the participants were divided into two equal groups (40 mothers and 40 fathers in each group). The data were analyzed by three evaluators who were blind to the study to avoid any chances of error. PATIENTS/PARTICIPANTS: A sample of 160 sporadic participants were identified and evaluated. Group A was composed of 80 healthy parents not affected by cleft lip and cleft palate but had at least one child born with nonsyndromic cleft. Group B consisted of 80 healthy parents not affected by cleft lip and cleft palate and had healthy children without cleft lip and cleft palate. MAIN OUTCOME MEASURES: Main outcome measures were marked dermatoglyphic asymmetry and specific lip print pattern in the study group. RESULTS: We found marked asymmetry in various fingerprints and specific type II and type III lip print in the study group when compared with the control group. It was observed that groove count on the lip was significantly more frequent in study group parents. CONCLUSION: Our study determined that there is a significant correlation between increased dermatoglyphic asymmetry and specific type II and type III lip print pattern in parents of children born with cleft. This could act as an important screening marker for the prediction of cleft lip and cleft palate inheritance.

Assessment of Environmental and Hereditary Influence on Development of Pituitary Tumors Using Dermatoglyphic Traits and Their Potential as Screening Markers.

The aim of this study was to assess environmental and hereditary influence on development of pituitary tumors using dermatoglyphic traits. The study was performed on 126 patients of both genders with pituitary tumors (60 non-functional and 66 functional pituitary tumor patients) in comparison to the control group of 400 phenotypically healthy individuals. Statistical analysis of quantitative and qualitative traits of digito-palmar dermatoglyphics was performed, and hormonal status was determined according to the standard protocols. Although we did not find markers that could specifically distinguish functional from non-functional tumors, we have found markers predisposing to the development of tumors in general (a small number of ridges between triradius of both hands, a smaller number of ridges between the triradius of c-d rc R), those for endocrine dysfunction (increased number of arches and reduced number of whorls, difference of pattern distribution in the I3 and I4 interdigital space), and some that could potentially be attributed to patients suffering from pituitary tumors (small number of ridges for variables FRR 5, smaller number of ridges in the FRL 4 of both hands and difference of pattern distribution at thenar of I1 and I2 interdigital space). The usage of dermatoglyphic traits as markers of predisposition of pituitary tumor development could facilitate the earlier detection of patients in addition to standard methods, and possibly earlier treatment and higher survival rate. Finally, our results are consistent with the hypothesis about multifactorial nature of pituitary tumor etiology comprised of both gene instability and environmental factors.

The application of a biometric identification technique for linking community and hospital data in rural Ghana.

BACKGROUND: The reliability of counts for estimating population dynamics and disease burdens in communities depends on the availability of a common unique identifier for matching general population data with health facility data. Biometric data has been explored as a feasible common identifier between the health data and sociocultural data of resident members in rural communities within the Kintampo Health and Demographic Surveillance System located in the central part of Ghana. OBJECTIVE: Our goal was to assess the feasibility of using fingerprint identification to link community data and hospital data in a rural African setting. DESIGN: A combination of biometrics and other personal identification techniques were used to identify individual's resident within a surveillance population seeking care in two district hospitals. Visits from resident individuals were successfully recorded and categorized by the success of the techniques applied during identification. The successes of visits that involved identification by fingerprint were further examined by age. RESULTS: A total of 27,662 hospital visits were linked to resident individuals. Over 85% of those visits were successfully identified using at least one identification method. Over 65% were successfully identified and linked using their fingerprints. Supervisory support from the hospital administration was critical in integrating this identification system into its routine activities. No concerns were expressed by community members about the fingerprint registration and identification processes. CONCLUSIONS: Fingerprint identification should be combined with other methods to be feasible in identifying community members in African rural settings. This can be enhanced in communities with some basic Demographic Surveillance System or census information.

Towards Contactless, Low-Cost and Accurate 3D Fingerprint Identification.

Human identification using fingerprint impressions has been widely studied and employed for more than 2000 years. Despite new advancements in the 3D imaging technologies, widely accepted representation of 3D fingerprint features and matching methodology is yet to emerge. This paper investigates 3D representation of widely employed 2D minutiae features by recovering and incorporating (i) minutiae height z and (ii) its 3D orientation φ information and illustrates an effective matching strategy for matching popular minutiae features extended in 3D space. One of the obstacles of the emerging 3D fingerprint identification systems to replace the conventional 2D fingerprint system lies in their bulk and high cost, which is mainly contributed from the usage of structured lighting system or multiple cameras. This paper attempts to addresses such key limitations of the current 3D fingerprint technologies bydeveloping the single camera-based 3D fingerprint identification system. We develop a generalized 3D minutiae matching model and recover extended 3D fingerprint features from the reconstructed 3D fingerprints. 2D fingerprint images acquired for the 3D fingerprint reconstruction can themselves be employed for the performance improvement and have been illustrated in the work detailed in this paper. This paper also attempts to answer one of the most fundamental questions on the availability of inherent discriminable information from 3D fingerprints. The experimental results are presented on a database of 240 clients 3D fingerprints, which is made publicly available to further research efforts in this area, and illustrate the discriminant power of 3D minutiae representation and matching to achieve performance improvement.

Magnetically optimized SERS assay for rapid detection of trace drug-related biomarkers in saliva and fingerprints.

New developments in the fields of human healthcare and social security call for the exploration of an easy and on-field method to detect drug-related biomarkers. In this paper, Au nanoparticles dotted magnetic nanocomposites (AMN) modified with inositol hexakisphosphate (IP6) were used as surface-enhanced Raman scattering (SERS) substrate to quickly monitor trace drug-related biomarkers in saliva and to on-site screen a trace drug biomarker in fingerprints. Due to inducing with an external magnet, such substrate presented a huge SERS activity, which has met the sensitivity requirement for assay to detect the drug biomarkers in saliva from the U.S. Substance Abuse and Mental Health Services Administration, and also the limit of detection for drug biomarker in fingerprint reached 100 nM. In addition, this AMN-based SERS assay was successfully conducted using a portable Raman spectrometer, which could be used to on-site and accurately differentiate between the smokers and drug addicts in near future.

Qualitative and quantitative assessment of single fingerprints in forensic DNA analysis.

Fingerprints and touched items are important sources of DNA for STR profiling, since this evidence can be recovered in a wide variety of criminal offenses. However, there are some fundamental difficulties in working with these samples, including variability in quantity and quality of extracted DNA. In this study, we collected and analyzed over 700 fingerprints. We compared a commercially available extraction protocol (Zygem) to two methods developed in our laboratory, a simple one-tube protocol and a high sensitivity protocol (HighSens) that includes additional steps to concentrate and purify the DNA. The amplification protocols tested were AmpFLSTR® Identifiler® using either 28 or 31 amplification cycles, and Identifiler® Plus using 32 amplification cycles. We found that the HighSens and Zygem extraction methods were significantly better in their DNA yields than the one-tube method. Identifiler® Plus increased the quality of the STR profiles for the one-tube extraction significantly. However, this effect could not be verified for the other extraction methods. Furthermore, microscopic analysis of single fingerprints revealed that some individuals tended to shed more material than others onto glass slides. However, a dense deposition of skin flakes did not strongly correlate with a high quality STR profile.

Assessment of the methodology for estimating ridge density in fingerprints and its forensic application.

In recent times, some studies have explored the forensic application of dermatoglyphic traits such as the epidermal ridge breadth or ridge density (RD) toward the inference of sex and population from fingerprints of unknown origin, as it has been demonstrated that there exist significant differences of fingerprints between sexes and between populations. Part of the population differences found between these studies could be of methodological nature, due both to the lack of standardisation in the position of the counting area, as well as to the differences in the method used for obtaining the fingerprint. Therefore, the aim of this study was to check whether there are differences between the RD of fingerprints depending on where the counting area is placed and how the fingerprints are obtained. Fingerprints of each finger were obtained from 102 adult Spanish subjects (50 females and 52 males), using two methods (plain and rolled). The ridge density of each fingerprint was assessed in five different areas of the dactylogram: two closer to the core area (one on the radial and the other on the ulnar side), two closer to the outermost area of each of the sides (radial and ulnar), and another one in the proximal region of the fingertip. Regardless of the method used and of the position of the counting area, thumbs and forefingers show a higher RD than middle, ring, and little fingers in both sexes, and females present a higher RD than males in all areas and fingers. In both males and females, RD values on the core region are higher than those on the outer region, irrespective of the technique of fingerprinting used (rolled or plain). Regardless of the sex and location of the count area (core or outer), the rolled fingerprints exhibit RD greater than that of the plain ones in both radial and proximal areas, whereas the trend is inverted in the ulnar area, where rolled fingerprints demonstrate RD lesser than that of the plain ones. Therefore, in order for the results of different studies to be comparable, it is necessary to standardise the position of the count area and to use the same method of obtaining the fingerprint, especially when involving a forensic application.

Effects of CBRN decontaminants in common use by first responders on the recovery of latent fingerprints--assessment of the loss of ridge detail on glass.

Following a CBRN incident, first responders use decontamination procedures to reduce the risk of exposure. The effect of decontamination on forensic trace material has, however, not been fully examined. This study sought to evaluate the effect of five different physical or chemical decontamination materials on the recovery of latent fingerprints. Fingerprints were deposited on glass slides, decontaminated, and assessed on the presence of ridge detail. The results demonstrate that decontamination affects the quality of latent fingerprints substantially. On at least 61% of the fingerprints, a reduced amount of ridge detail was observed upon decontamination. Furthermore, development with cyanoacrylate appeared not to succeed anymore. Instead, the ability of vacuum metal deposition to successfully develop decontaminated fingerprints is demonstrated. The results from this study may contribute to an increased forensic awareness regarding decontamination and emphasize the necessity for further research into new item decontamination procedures or new forensic initiatives prior to decontamination.

Inbreeding effects on palmar dermatoglyphic characters in three endogamous social groups of West Bengal, India.

The present study reports inbreeding effects on mean palmar dermatoglyphic characteristics: triradial count on palm, maximal atd angle, adt angle, td ridge count, ab ridge count, main line index (MLI) and ab ridge breadth. Samples were drawn from adult males belonging to three endogamous sections representing Hindu caste Telaga of Kharagpur (West Midnapore), Ansari Muslims of Nandigram (East Midnapore) and Sheik-Sunni Muslims of Braddhaman in West Bengal, India. Consistent trend of higher mean triradial number, adt angle, and lower mean td ridge count, ab ridge count, and ab ridge breadth was observed in inbred sections compared to their non-inbred relatives in three social groups.

Image Quality Assessment for Fake Biometric Detection: Application to Iris, Fingerprint, and Face Recognition.

To ensure the actual presence of a real legitimate trait in contrast to a fake self-manufactured synthetic or reconstructed sample is a significant problem in biometric authentication, which requires the development of new and efficient protection measures. In this paper, we present a novel software-based fake detection method that can be used in multiple biometric systems to detect different types of fraudulent access attempts. The objective of the proposed system is to enhance the security of biometric recognition frameworks, by adding liveness assessment in a fast, user-friendly, and non-intrusive manner, through the use of image quality assessment. The proposed approach presents a very low degree of complexity, which makes it suitable for real-time applications, using 25 general image quality features extracted from one image (i.e., the same acquired for authentication purposes) to distinguish between legitimate and impostor samples. The experimental results, obtained on publicly available data sets of fingerprint, iris, and 2D face, show that the proposed method is highly competitive compared with other state-of-the-art approaches and that the analysis of the general image quality of real biometric samples reveals highly valuable information that may be very efficiently used to discriminate them from fake traits.

Decision-theoretic reflections on processing a fingermark.

A recent publication in this journal [1] presented the results of a field study that revealed the data provided by the fingermarks not processed in a forensic science laboratory. In their study, the authors were interested in the usefulness of this additional data in order to determine whether such fingermarks would have been worth submitting to the fingermark processing workflow. Taking these ideas as a starting point, this communication here places the fingermark in its context of a case brought before a court, and examines the question of processing or not processing a fingermark from a decision-theoretic point of view. The decision-theoretic framework presented provides an answer to this question in the form of a quantified expression of the expected value of information (EVOI) associated with the processed fingermark, which can then be compared with the cost of processing the mark.

An assessment of the effectiveness of 5-methylthioninhydrin within dual action reagents for latent fingerprint development on paper substrates.

A critical investigation of 5-methylthioninhydrin (5MTN) is presented as a 'dual action' formulation component for the development of latent finger marks on paper substrates. Preparation of a dual action reagent was performed by combining proportions of 5MTN and zinc chloride (ZnCl(2)) in a pre-mixed solution. Developed prints (deposited on filter paper substrates) could be subsequently visualised in both colour and fluorescence modes. Finger mark quality was graded using a quartered print approach for a number of reagent compositions to deliver an optimised formulation recipe. To fully appraise 5MTN in comparison to currently employed chemistries, this reagent was evaluated against three alternative amino acid selective reagents, ninhydrin, 1,8-diazafluorenone (DFO) and 1,2-indandione/ZnCl(2). Six common paper types were used for this purpose and split depletion finger marks from six donors were collected. Finger mark sets were also left for two days or two weeks to show the effect of ageing on development quality. For the first time, it was shown that 5MTN/ZnCl(2) is effective as a 'dual action' reagent under the United Kingdom climate conditions. However, results presented herein show that the existing recommended chemistries and the 1,2 indandione/ZnCl(2) process are all more effective than this new latent finger mark enhancement reagent. In a preliminary sequencing study, we show the effectiveness of the existing DFO-ninhydrin sequence over dual action reagents.